Premier Square Cast Iron Downpipe 1.83m (6') Eared available in Standard Grey Metal Primer or finished in Black Semi Gloss - Other Colours available upon request
Hargreaves Cast Iron Downpipes
Hargreaves cast iron downpipes have been serving buildings effectively for centuries and continue to offer value for money and reliability.
Cast iron downpipes, available off the shelf, range from sizes 65mm (2.5 inch), 75mm (3 inch), 100mm (4 inch) and 150mm (6 inch). In addition to these pipes, there is a full range of standard fittings.
Square and rectangular cast iron downpipes and fittings are also readily available in 75mm x 75mm (3 x 3 inch), 100mm x 100mm (4 x 4 inch), 125mm x 125mm (5 x 5 inch), 100mm x 75mm (4 x 3 inch), 125mm x 70mm (5 x 2.75 inch), 125mm x 100mm (5 x 4 inch) and 150mm x 100mm (6 x 4 inch). Other pattern sizes maybe available upon request.
A range of standard Rainwater Hopper heads are available and can be customised with dates or other embellishments upon request. Also available are ornamental rainwater heads, which can be adapted to fit different size and shape of down pipes.
All products are available in grey metal primer, for on site painting or Premier extra,a black gloss paint ready for installation. The primer paints used are RAL 7024 dark grey in colour and have been specifically formulated to create a barrier to corrosion. The primers can be over coated with Epoxy, Polyurethane or Acrylic paints. Products are coated internally and externally. The primer coated supplied products are classed as a transit coating and provide short term protection during delivery and undercover storage.
Hargreaves Premier Extra is an exterior coating, high solids, black gloss paint. Black is the standard painted product. High solids gloss paints offer greater durability than paints with a lower solids content. Other RAL colours are available upon request but surcharges would apply. All special RAL coloured products are delivered with a matching tin of touch up paint to make good on any exposure of bare iron as a result of transit and or installation damage.
Coastal regions are difficult to define,however Hargreaves guidelines, they are described as those areas within 5km of the coast.The conditions in these areas are more aggressive than those experienced in many other areas. It is therefore very important that any paint chips or impact / installation damage is rectified straight away. Failure to rectify damage at an early stage, will lead to corrosion of the product progressing at an increased rate above what would be seen at an inland location. To combat this aggressive environment, the overall coating thickness on the Premier Coastal products is much greater. This increased coating thickness forms a longer-lasting barrier between the environment and the substrate thus delaying the onset of corrosion.