Marley Rainwater Systems
The Marley Plumbing & Drainage rainwater range consists of nine gutter profiles and seven downpipe options.
Advanced Life4 technology on five of the key profiles, coupled with the benefits of the easyclip and notching capability combine to make the Marley rainwater range the most comprehensive available.
We're all affected by the steady advance of time, as years of exposure affects how everything looks. To combat this Marley Plumbing & Drainage advanced their manufacturing process to create Life4. Looks better...
Life4 rainwater systems can withstand exposure for up to four times longer than standard PVCu rainwater gutters and downpipes and have high gloss levels that are consistent with the fittings, improving the overall aesthetic of the system. ...for longer Not only do Life4 products look better, they last longer retaining colour far in excess of the required standard.
Life4 products have been exposed to up to four times the European weathering test duration and performed admirably. Life4 – the performance standard The benchmark for weathering tests for rainwater systems is set out within the European standards*. The weathering test essentially mimics actual conditions, but also accelerates them in order that long term performance may be assessed.
Life4 products have been assessed and can perform up to four times longer than standard PVCu. Life4 – the science of production Life4 uses a higher specification material to form a capping layer on the outside of the gutter or pipe. This material is by its very nature more durable and has a high gloss finish. The inside layer of the product is standard PVCu. The overall system contains a minimum 15% recycled material.
Easyclip Deepflow, Clip-master, Flowline and Deepflow150 rainwater systems benefit from the Marley easyclip, which makes jointing both easy and reliable. The easyclip has twin compression tabs, which apply downward pressure onto the gutter seal, to ensure a watertight joint. A positive ‘click’ is made when the gutter is in place. The easyclip also makes life easy if you need to dismantle the joint.
Notch adaptor (RGNA1) It is possible to adapt the easyclip to make fittings suitable for ‘notch’ jointing, by fitting a ‘notch adaptor’ into the centre of the easyclip. The adaptor will then fit into a notch cut into the back of the gutter. This is an effective way of allowing gutter to expand and contract due to temperature change, without gutter and fitting pulling apart. There is also no need to anchor unions and outlets to the fascia, an ideal solution when using rafter arm brackets.