

Mon-Fri 9:30am to 5:00pm
Mon-Fri 9:00am to 5:00pm
Modulock Maintenance Access Unit 250mm x 250mm, available in a range of depths - manufactured in Galvanised & Stainless Steel
Harmer Roof Drainage Modulock Channel Drain Range is an advanced linear steel drainage range for use within a raised deck structure. Combining threshold drainage with the level access requirements of Part M, it can be used in its own right, or especially with Harmer Modulock Raised Deck Supports.
Harmer Modulock Channel Drain is a highly versatile line drainage system designed to provide the ideal level access drainage solution, where rainwater run-off and percolation are required to be intercepted, at the perimeter of a building, or across thresholds and points of access into and out of a building.
Manufacturer: Harmer Drainage Systems
Product Code: MD249252/00/01/02
Return to Listing
End Plates 200mm Wide available in two depths both in Galvanised Steel & Stainless Steel
Modulock Corner Piece 90 Degree 200mm Wide, available in two depths; manufactured in Galvanised & Stainless Steel
Mesh Grate 200mm Wide available in 1000mm or 500mm, manufactured in Galvanised Mild Steel or Stainless steel
Modulock Open Bottom Channel Drain 200mm wide available in two different depths, and a range of lengths both in Galv & Stainless Steel
Modulock Perforated Channel Drain 200mm wide available in two different depths and a range of lengths both in Galv & Stainless Steel
Cross Bar Grate 200mm Wide available in 1000mm or 500mm, manufactured in Galvanised Mild Steel or Stainless steel
Modulock Unperforated Channel Drain 200mm wide available in two different depths and a range of lengths both in Galv & Stainless Steel
Modulock Maintenance Access Unit Top Grate 400mm x 400mm, manufactured in Galvanised & Stainless Steel
Modulock Maintenance Access Unit Top Grate 250mm x 250mm, manufactured in Galvanised & Stainless Steel
Perforated Grate 200mm Wide available in 1000mm or 500mm, manufactured in Galvanised Mild Steel or Stainless steel
Outlet Unit DN75 200mm Wide, 1m Long & available in two depths both in Galvanised Steel & Stainless Steel
Modulock Maintenance Access Unit 400mm x 400mm, available in a range of depths - manufactured in Galvanised & Stainless Steel
Modulock Maintenance Access Unit 250mm x 250mm, available in a range of depths - manufactured in Galvanised & Stainless Steel