lcp
Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6
Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6
Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6
Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6
Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6
Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6

Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6

V1080301
Aliaxis

Vulcathene Enfusion Thermal Stress Relief Unit L803/4/6, colour Black, produced in nominal internal diameters of 76mm, 102mm and 152mm. This unit can be installed in either vertical or horizontal pipework. When installed it is important to ensure that the spigot end is on the outflow end of the fitting. The unit must be anchored with a metal clamp which should be located on top of the moulded locators, moulded round the body of the stress relief unit, which then allows the pipe inserted into the collar to expand and contract. Note: The body of the SRU incorporates an ‘0’ ring seal.

Vulcathene boasts over 65 years proven performance in the laboratories of thousands of schools, universities, hospitals and research facilities around the world... proof of its very high reliability for safe chemical drainage.

Vulcathene Enfusion System Overview 

Under normal laboratory conditions the Vulcathene Mechanical drainage system is more than sufficient. Where a fused joint is preferred - for example, where pipe is to be buried or run overhead in ceiling voids or in drainage stacks - the Vulcathene Enfusion electrofusion range of chemical waste fittings is recommended.

Manufacturer: Vulcathene (Aliaxis)

Product Code:

From
£222.07 £222.07 ex. VAT
Estimated delivery 5-7 working days

( £266.48Inc VAT )
( £266.48Inc VAT )
Order within --:--:-- for
estimated delivery Friday, 14th August
Estimated delivery 5-7 working days
Qty

All delivery costs are for UK mainland addresses only (excluding highlands). Additional charges may apply for other locations — we will advise before dispatch.

How much does delivery cost?Automatically calculated at basket based on manufacturer, weight and order value.
When will I receive my order?Each product shows an estimated lead time in green. Contact us if time critical before ordering.
Will I get a delivery date?Yes — we'll email an order acknowledgement with your estimated delivery date once payment is received.
Is my delivery date guaranteed?No. Most orders are via third party couriers. Do not book labour until goods are on site and checked.
Do you provide tracking?Most suppliers don't provide tracking. Call or email us on your estimated date and we can check it's out for delivery.
Do I need to be present?Yes — all deliveries must be signed for. Some items arrive on pallets up to 3m long and require help offloading. Failed delivery attempts may incur charges.
Where will my order be delivered?Kerbside only, with no mechanical offloading. Do not book installation labour until your order has been received and fully checked.
Will I receive my order in one delivery?Not always — items may ship from separate locations or be split across multiple deliveries depending on stock availability.
What if my delivery is late?Please contact us if your order doesn't arrive on the estimated date.
What should I do when my order arrives?Check immediately for correct items and damage. If storing powder-coated products outside, cover with tarpaulin to prevent water staining.
Wrong or damaged items?Raise a written claim within 3 working days of delivery, with images. Claims received after 3 days or without images cannot be considered.
Can I collect my order?Possibly — contact us with the items you'd like to collect and we'll advise if collection is available from us or the manufacturer.

Further questions? Call 0330 223 1731 or email sales@guttercentre.co.uk

We recommend contacting our sales office before placing any order to establish whether the product is a stock, non-stock or made/painted to order item. All requests to return items must be made in writing first.

Stock itemsReturnable within 14 days of purchase for a full refund (excluding carriage), provided items are unused, in original packaging and in saleable condition.
Non-stock itemsReturns are at the manufacturer's discretion and may incur a restocking charge. Items cannot be returned to Gutter Centre directly.
Made or painted to orderNon-returnable. This includes all aluminium mill or powder coated products, GRP, steel and cast iron products. Always check before ordering.
How to make a returnOnce your return is accepted in writing, we'll provide the returns address and any references to include. Returns sent without written acceptance will be refused.
Return shippingWe do not offer a collection service. You are responsible for returning goods in saleable condition at your own cost using a tracked service.
RefundsOnce items are returned and checked, refunds (less any restocking charges if applicable) will be issued to the original credit or debit card.

Further questions? Call 0330 223 1731 or email sales@guttercentre.co.uk

No products.

Add to your project

Frequently bought with this product
Vulcathene Pipe x 4m Length Vulcathene Pipe x 4m Length

Vulcathene Pipe x 4m Length

Pipe x 4m length, used for both Mechanical & Enfusion Systems, Colour Black, Made in nominal internal diameters of 38mm, 51mm, 76mm, 102mm and 152mm (Enfusion only)
Code:
From
£127.07 Ex VAT£152.48 Inc VAT
Estimated delivery Friday, 14th August
Estimated delivery 5-7 working days
Add to Basket Info
Vulcathene Enfusion Flange L40 Vulcathene Enfusion Flange L40

Vulcathene Enfusion Flange L40

Enfusion Flange L40, Colour Black, Made in nominal internal diameters of 51mm, 76mm, 102mm & 152mm
Code:
From
£79.60 Ex VAT£95.52 Inc VAT
Estimated delivery Friday, 14th August
Estimated delivery 5-7 working days
Add to Basket Info
Vulcathene Enfusion Double Socket Long Sweep Bend L17 Vulcathene Enfusion Double Socket Long Sweep Bend L17

Vulcathene Enfusion Double Socket Long Sweep Bend L17

Enfusion Double Socket Long Sweep Bend L17, Colour Black, Made in nominal internal diameters of 38mm, 51mm, 76mm, 102mm and 152mm 
Code:
From
£74.42 Ex VAT£89.30 Inc VAT
Estimated delivery Friday, 14th August
Estimated delivery 5-7 working days
Add to Basket Info
Vulcathene Enfusion Double Socket 45 Degree Slow Bend L19 Vulcathene Enfusion Double Socket 45 Degree Slow Bend L19

Vulcathene Enfusion Double Socket 45 Degree Slow Bend L19

Enfusion Double Socket 45 Degree Slow Bend L19, Colour Black, Made in nominal internal diameters of 38mm, 51mm, 76mm, 102mm and 152mm 
Code:
From
£43.23 Ex VAT£51.88 Inc VAT
Estimated delivery Friday, 14th August
Estimated delivery 5-7 working days
Add to Basket Info

Top